100W折叠太阳能板 – ETFE、IP67、支架
100W折叠太阳能板 – ETFE、IP67、支架
- 100 W monocrystalline cells, 23–25% efficiency
- ETFE surface with IP67 water and dust resistance
- Built-in kickstand and carry handle – folds in half
- Connects to the Home Power Station's Anderson solar input
离网也能补电。在阳光下展开，就能在营地、房车里或停电时的后院为储能电源充电——用完对折，提着把手就走。
你会喜欢它的理由
- 100W 单晶硅电池片，转换效率 23–25%
- ETFE 层压表面——坚固耐刮，适合强烈日照
- IP67 防水防尘（请保持接头干燥）
- 内置可调支架，方便朝向太阳
- 可对折——折叠后约 59 × 59 厘米，重 3.8 千克
- 标准 MC4 太阳能输出
适用设备
- Lights On 家用储能电源——连接其 Anderson 太阳能输入口（12–50V，最高 200W）。储能电源最高支持 200W 输入，两块板充电更快。
- 太阳能输入支持约 18–25V 的大多数便携式储能电源——请先确认你的电源的输入范围和接口。
充电时间取决于日照、季节和角度。在强烈的直射阳光下，实际输出约 70–80W——用一块板将家用储能电源从零充满约需 7–8 小时。
规格
- 额定功率：100W（±5%）
- 电池片：单晶硅，转换效率 23–25%
- 开路电压（Voc）：24.48V；最大功率电压（Vmp）：20.8V
- 短路电流（Isc）：5.33A；最大功率电流（Imp）：4.8A
- 表面：ETFE 层压
- 防护等级：IP67
- 展开尺寸：1050 × 587 毫米；折叠尺寸：约 587 × 587 毫米
- 重量：3.8 千克
- 输出：MC4 接头
配送
不含电池，可发往全球。澳大利亚境内免运费；未使用或与描述不符的商品享受 30 天退款保证。
How it works
Unfold the panel, angle it at the sun with the built-in kickstand and connect it to your power station's solar input. The Home Power Station accepts up to 200 W of solar (12–50 V, Anderson), so you can add a second panel for faster charging.
What's included
1 × 100W Foldable Solar Panel (MC4 output).
Key specs: 100 W · monocrystalline, 23–25% efficiency · ETFE · IP67 · Voc 24.48 V · Vmp 20.8 V · 1050 × 587 mm unfolded · 3.8 kg.
Shipping
Free shipping within Australia (orders $99+). We also ship solar panels to New Zealand, the US, UK, Canada, Europe and more – see our shipping page.
30-day guarantee
Covered by our 30-day money-back guarantee: if your item is unused or not as described, contact us within 30 days and we'll arrange a return and refund. Changed your mind? Return postage is on you. Faulty? It's on us.
Full details on the 30-day guarantee page.
FAQ
How long does it take to charge the Home Power Station?
In strong, direct sun, about 7–8 hours from empty with one panel. The station accepts up to 200 W, so two panels charge it faster.
Will it work with other power stations?
Most stations with a solar input that accepts around 18–25 V – check your station's input voltage range and connector first (you may need an MC4 adapter cable), or message us.